Biosketch

Dr. Vinay Panwar has completed the Doctorate (Ph.D.) from Indian Institute of Technology Roorkee, India in December 2017 and Master’s in Materials Science from Indian Institute of Technology Kanpur, India in 2013. He has done his Bachelor’s in Mechanical Engineering and awarded by the honours degree, upon completion, in 2010. Dr. Panwar is presently working as Assistant Professor in the Mechanical Engineering Department at Netaji Subhas University of Technology, Dwarka, New Delhi – 110078, India. In addition to teaching, Dr. Panwar is actively involved in research activities and supervising Ph.D. students. His research interests turns around the ‘Development of Advanced Materials’ and specifically related to the synthesis and modifications of nanomaterials; polymer composites; energy applications; modeling and simulation; physical characterizations and experimental analysis for micro-/nano-materials. He has published more than 30 research articles in journals of well repute (SCI/SCI-E/Scopus) and 5 book chapters, till date.

Areas of Interest

Polymer composites; Nanomaterials; Synthesis & characterization; Modeling & simulation; Mechanical, thermal & bio-mechanical properties.

PUBLICATIONS

Papers Published in SCI/SCI-E Indexed Journals

1. Vinay Panwar, Ananya Chattree and Kaushik Pal. A new facile route for synthesizing of graphene oxide using mixture of sulphuric-nitric-phosphoric acids as intercalating agent. Physica E: Low-dimensional Systems and Nanostructures, 2015, 73, 235-241. 
2. Narayan Debnath, Vinay Panwar, Souvik Bag, Mitali Saha and Kaushik Pal. Effect of carbon black and nanoclay on mechanical and thermal properties of ABS-PANI/ABS-PPy blends. Journal of Applied Polymer Science, 2015, 132 (38), 42577. 
3. Pankaj Sharma, Vinay Panwar and Kaushik Pal. Clay-assisted dispersion of carbon black in thermoplastic nanocomposites. Journal of Applied Polymer Science, 2015, 132 (7),41477.
4. Raghunandan Sharma, Amit Kumar Yadav, Vinay Panwar and Kamal K. Kar. Viscoelastic properties of coil carbon nanotube-coated carbon fiber-reinforced polymer nanocomposites. Journal of Reinforced Plastics and Composites, 2015, 34 (12), 941-950. 
5. Kaushik Pal, Vinay Panwar, Souvik Bag, James Manuel, Jou-Hyeon Ahn and Jin Kuk Kim. Graphene oxide-polyaniline-polypyrrole nanocomposite for a supercapacitor electrode. RSC Advances, 2015, 5 (4), 3005-3010. 
6. Vinay Panwar, Jitendra Bahadur, Babulal Chaudhary and Kaushik Pal. An optimum method for uniform synthesis of zirconia on reduced graphene oxide. Advanced Powder Technology, 2016, 27 (2), 728-733. 
7. Kaushik Pal, Vinay Panwar, Sven Friedrich and Michael Gehde. An investigation on vibration welding of amorphous and semicrystalline polymers. Materials and Manufacturing Processes, 2016, 31 (3), 372-378. 
8. Jitendra Bahadur, Shraddha Agrawal, Vinay Panwar, Azra Parveen, and Kaushik Pal. Antibacterial properties of silver doped TiO2 nanoparticles synthesized via sol-gel technique. Macromolecular Research, 2016, 24 (6), 488-493. 
9. Jitendra Bahadur, Pushpendra Singh, Vinay Panwar and Kaushik Pal. Catalytic action of graphene oxide towards the growth of carbon nanotubes. Materials Letters, 2016, 178, 292-295. 
10. Navjot Kaur, Jitendra Bahadur, Vinay Panwar, Pushpendra Singh, Keerti Rathi and Kaushik Pal. Effective energy harvesting from a single electrode based triboelectric nanogenerator. Scientific Reports, 2016, 6, 38835. 
11. Vinay Panwar and Kaushik Pal. An optimal reduction technique for rGO/ABS composites having high-end dynamic properties based on Cole-Cole plot, degree of entanglement and C-factor. Composites Part B: Engineering, 2017, 114, 46-57. 
12. Pankaj Sharma, Vinay Panwar, Alexander P. Kharitonov and Kaushik Pal. Effect of nanoclay on carbon black reinforced blend of amorphous-semicrystalline polymers. Polymer Bulletin, 2017, 74 (8),3341-3351. 
13. Vinay Panwar and Kaushik Pal. Dynamic performance of an amorphous polymer composite under controlled loading of reduced graphene oxide based on entanglement of filler with polymer chains. Journal of Polymer Research, 2018, 25, 53. 
14. Subhash Singh, Vinay Panwar and Kaushik Pal. Synthesis and characterization of micro-composites: For enhanced electrochemical properties. Surfaces and Interfaces, 2018, 11, 107-111. 
15. Narayan Debnath, Vinay Panwar, Tushar Roy, Mitali Saha and Kaushik Pal. Improved dispersion of carbon black in ABS/PANI blend through its acid functionalization and addition of nanoclay, thereby enhancing mechanical and thermal properties. Polymer Bulletin,2019, 77(9), 4759-4772. 
16. Babulal Chaudhary, Vinay Panwar, Tushar Roy and Kaushik Pal. Thermomechanical behaviour of zirconia – multiwalled carbon nanotubes reinforced polypropylene hybrid composites. Polymer Bulletin,2019, 76 (1), 511-521. 
17. Vinay Panwar and Kaushik Pal.Influence of addition of selective metallic species on mechanical properties of graphene/acrylonitrile-butadiene-styrene composites. Polymer Composites, 2020, 41 (4), 1636-1648.
18. Babulal Chaudhary, Vinay Panwar, Tushar Roy and Kaushik Pal. Effect of addition of hydroxyapatite as secondary filler in CNT reinforced polypropylene hybrid composites. Polymers and Polymer Composites,2020, 2020.
19. Santosh Kumar Rai, Pardeep Kumar and Vinay Panwar. Numerical analysis of influence of geometry and operating parameters on Ledinegg and dynamic instability on supercritical water natural circulation loop. Nuclear Engineering and Design,2020, 369, 110830. 
20. Vinay Panwar, Vijay Pandey and Kaushik Pal. Dynamic mechanical and EWF study of reactive organo-montmorillonite and carbon black filled polyurethane nanocomposites. Polymer-Plastics Technology and Materials, 2021, 60(9), 962-973. 
21. Santosh Kumar Rai, Pardeep Kumar and Vinay Panwar. Mathematical and numerical investigation of Ledinegg flow excursion and dynamic instability of natural circulation loop at supercritical condition. Annals of Nuclear Energy, 2021, 155, 108129, ISSN 0306-4549.
22. Santosh Kumar Rai, Pardeep Kumar and Vinay Panwar. Numerical investigation of steady state characteristics and stability of supercritical water natural circulation loop of a heater and cooler arrangements. Nuclear Engineering and Technology, 2021, 53, 3597-3611. 
23. Narayan Debnath, Souvik Bag, Vinay Panwar, Mitali Saha and Kaushik Pal. Effect of acyl chloride functionalized carbon black on mechanical and thermal properties of acrylonitrile butadiene styrene/polyaniline blend. Indian Journal of Engineering and Materials Sciences, 2021, 28, 472-479. ISSN:0975-1017.                                
24. Santosh Kumar Rai, Neha Ahlawat, Raghvendra Upadhyay, Pardeep Kumar, Vinay Panwar. A study on the effect of geometry and operating variables on density wave oscillation in supercritical natural circulation loop. Computation, 2022, 10(2), 25. DOI.org/10.3390/computation10020025, ISSN: 2079-3197.
25. Mahesh Kumar Gupta, Rajendra Prasad Mahapatra, Vinay Panwar. Effect of temperature and strain rate variation on tensile properties of a defective nanocrystalline copper-tantalum alloy. Journal of Scientific and Industrial Research, 2022, 85, 358-366. ISSN: 0975-1084.    

Conference Publications (Scopus)

1. Vinay Panwar, Ananya Chattree and Kaushik Pal. Effect of nanoclay on thermomechanical behaviour of graphene oxide/polymer composites. Proceedia Engineering,2017, 216, 101-110. 
2. Santosh Kumar Rai, Pardeep Kumar and Vinay Panwar. Computational analysis of static flow instabilities in supercritical natural circulation loop. Chapter 35, In: Shripad Revankar et al. (Eds),„Proceedings of International Conferenceon Thermofluids (KIIT THERMO 2020),Lecture Notes in Mechanical Engineering (LNME)‟, Springer Nature Singapore, 2021, 387-395.
3. Dhanusiya Govindasamy and Vinay Panwar. Effect of variation in thickness of phase change material on temperature across the composite building wall. Materials Today: Proceedings, 2020, Accepted on 18.11.2020.
4. Mahesh Kumar Gupta, Aakash Shankdhar, Abhinav Kumar, Anant Vermon, Aayush Kumar Singh and Vinay Panwar. Temperature and strain rate dependent stress-strain behaviour ofnitinol. Materials Today: Proceedings, 2021, 43, 395-399. 
5. Santosh Kumar Rai, Neha Ahlawat, Pardeep Kumar and Vinay Panwar. Mathematical modeling and numerical investigation of density wave instability of supercritical natural circulation loop. E3S Web of Conferences ICCHMT21, 2021, 321, 04004. DOI.org/10.1051/e3sconf/202132104004.       
6. Rajat Kumar, Vinay Panwar, Mahesh Kumar Gupta. Temperature and strain rate dependent tensile behavior of polycrystalline nanocopper under dynamic loading. Materials Today: Proceedings, 2022, DOA: 29-01-2022, DOI.org/10.1016/j.matpr.2022.01.433.     
7. Mahesh Kumar Gupta, Vinay Panwar, Rajendra Prasad Mahapatra. Computational mechanical behaviour of nanocrystalline copper-tantalum alloy. Materials Today: Proceedings, 2022, DOA: 21-02-2022, DOI.org/10.1016/j.matpr.2022.02.619.                      

Books/Book chapters/Reports/General articles, etc.

1. Kaushik Pal, Vinay Panwar and Jitendra Bahadur. Rubber blend nanocomposites. In: Sabu Thomas and Hanna Maria (Eds.), ‘Progress in Rubber Nanocomposites’, Woodhead Publishing, 2016, 319-348, ISBN: 978-0-08-100428-9.
2. Vinay Panwar and Kaushik Pal. Dynamic mechanical analysis of clay-polymer nanocomposites. In: Khouloud Jlassi, Mohamed M. Chehimi and Sabu Thomas (Eds.), ‘Clay-Polymer Nanocomposites: Morphology, Structure, Properties and Applications’, Materials Today (Elsevier), 2017, 413-442, ISBN: 978-0-323-46153-5.
3. Vinay Panwar, Keerti, Pushpendra Singh and Kaushik Pal. Synthesis and modification of carbon-based nanofillers for polymer nanocomposites. In: Hari Singh Nalwa (Ed.), ‘Encyclopedia of Nanoscience and Nanotechnology’, Vol. 30, American Scientific Publishers, Valencia, California, 2019, 259-294, ISBN: 1-58883-001-2.
4. Neha Ahlawat and Vinay Panwar. Modeling and Simulation of Nano-Structured 2D Materials. In: Subhash Singh, Kartikey Verma and Chander Prakesh (Eds.), ‘Advanced Applications of 2D Nanostructures’, Springer Nature, 2021, 183-196, ISBN: 978-981-16-3321-8.
5. Vinay Panwar and Kaushik Pal. Recent developments of thermosetting polymers for advanced composites. In: Saleem Hashmi (Ed.), ‘Encyclopedia of Materials: Plastics and Polymers’, Elsevier, 2022, Proofing done on 31-03-2022, ISBN: 978-0128232910.